Static Equipment

960,00 €

Available!

Design of Mechanical Equipment in Industrial Plants

Javier Tirenti

Teacher

609 Available
seats

Mechanical Equipment used in Industrial Plants: Material Selection, Piping Systems, Pressure Vessels, Shell and Tube Heat Exchangers and Storage Tanks.

Free

ASME VIII Div. 2 | Design of Pressure Vessels by Analysis

Javier Tirenti

Teacher

0 Available
seats

Design by Analysis code compliance checks for collapse, ratcheting, fatigue, and buckling load cases. Differences between types of stresses. Structural stress using FEA, linearization.

35,00 €

Available!

Introduction to EN 13445 | Design and Fabrication of PV

Javier Tirenti

Teacher

21 Available
seats

InfoCertificateContact us!Info Would you like to access this course at no cost? This course is included as an exclusive benefit for members of our Arveng Hub community. If you are not yet a member, you can join for free to unlock access to this program and other specialized technical resources. 👉 Join Arveng Hub and [...]

75,00 €

Express!

Configuration of S&T heat exchangers (Self-guided)

Javier Tirenti

Teacher

18 Available
seats

InfoMethodologyContentsCertificateEnroll!Info In this course you will learn...... + Different configurations commonly used in S&T heat exchangers + Main elements + Heat exchangers configuration: tubes arrangement and number of passes Check out all of our express courses! WITH THE ACCESS TO THE COURSE YOU GET: Course access: 2 monthsThis level has been developed to be completed [...]

75,00 €

Express!

Material selection for S&T heat exchangers (Self-guided)

Javier Tirenti

Teacher

15 Available
seats

InfoMethodologyContentsCertificateEnroll!Info In this course you will learn...... + Main aspects of material selection + Obtain the mechanical properties from the code tables + Corrosion types + Material designation and most used materials Check out all of our express courses! WITH THE ACCESS TO THE COURSE YOU GET: Course access: 2 monthsThis level has been developed [...]

75,00 €

Express!

Material Selection for Pressure Vessels (Self-guided)

Javier Tirenti

Teacher

18 Available
seats

Material Selections for Pressure Vessels

75,00 €

Express!

Wind & seismic loads acting on pressure vessels (Self-guided)

Javier Tirenti

Teacher

16 Available
seats

Wind & Seismic Loads in Pressure Vessels

Free

API 650 & API 653 – Intro to the Design & Repair of Storage Tanks

Javier Tirenti

Teacher

0 Available
seats

Online engineering training course about the design and repair of storage tanks according to standards API 650 and API 653.

Free

Coming Soon!

Webinar | Introduction to the design of mechanical equipment New

Javier Tirenti

Teacher

0 Available
seats

DESCRIPTIONREGISTRATIONDESCRIPTION What topics will be covered in the webinar? During this webinar we will discuss the essential aspects of good design for the different types of mechanical equipment in an industrial plant. The equipment covered will include piping systems, pressure vessels, S&T heat exchangers and storage tanks When and where? Dates: To be defined Time: To be [...]

Testimonials

Munthir A.

Project Engineer

A high quality training program, each course is rich in contents and tailored to industrial standards and practices. The extensive experience of the instructors is the key factor in providing in-depth practical insights and understanding of real-world design cases

Okan Karabuğa

Mechanical Engineer, M.Sc. Engineering Team Leader at SOCAR-STP LLC Baku, Azerbaijan.

The pressure vessel design course is well prepared and designed for engineers who are interested in pressurized equipment. During the course, you can reach the instructors for every single question. The study materials have diverse knowledge from basic concepts to best practices. After enrolling in this course, I could keep my proficiency updated and I improved my perception of pressure vessels. As a consequence, I appreciate your efforts to contribute to people’s career development. I always follow your blogs and courses.

Ranjith Rajendran

Tank Construction Engineer at MCDERMOTT CB&I Storage Solutions, Dubai, United Arab Emirates.

The API 650 Online Couse is very much valuable and was challenging, but the study notes, materials and instructions were always there supporting me and ready to help. I enjoyed the class tremendously and I gained both the skills and confidence to thoughtfully use a variety of quantitative approaches In my work . I look forward to taking another class.

Óscar Bustamante Almazán

Engineer in Germany

I did the ASME B31 pipe design course with you and I left very satisfied. I opened many professional doors, thanks to which, I have reached where I am today.
Congratulations for the quality of service they offer. Without a doubt it is to date the best engineering training I have attended.

Cristhian Balderrama

Engineering Manager at Ausenco

The content was very thorough and the lecturer’s knowledge of the subject and ability to translate theoretical concepts to the real design cases was very impressive. I will recommend this course to those willing to expand their knowledge.

Fernando Armisen

Deputy Tehcnical Director Abantia Ticsa

It is great to be able to enrol in this kind of training sessions, where the instructor has a very deep knowledge of the subject and also possess a dilated international experience, enabling him to bring relevant experiences in many different sectors of this filed.

Alicia Castillo

Head of Training Department COIIM

After five years collaborating with Arveng, instructors have always shown high levels of commitment, responsibility and professionalism. At the same time, instructors have demonstrated vast experience and a deep knowledge of the different subjects given.