Customized

Free

ASME III Div. 1 | Design & Construction of Nuclear Components

Javier Tirenti

Teacher

0 Available
seats

Comprehensive training on ASME Section III, Division 1 for nuclear facility components. Covers NCA, NB, NC, ND, NE, NF, and NG requirements for design, materials, and certification.

Free

ASME B31.4 | Liquid Pipeline Systems in Industrial Plants

Javier Tirenti

Teacher

0 Available
seats

Technical course on liquid pipeline transportation systems per ASME B31.4. Comprehensive training on design, material specifications, welding, corrosion mitigation, and maintenance.

Free

ASME VIII | Design by Rules (DBR) vs Design by Analysis (DBA)

José Labastidas Cedeño

Teacher

0 Available
seats

Tailored In-company course on ASME VIII. Compare Design by Rules (DBR) and Design by Analysis (DBA). Master plastic collapse, fatigue, and Div 1 vs Div 2. Led by ASME Authorized Instructors.

Free

Principles | Operation | Selection of Centrifugal Pumps

Arveng Training

Teacher

0 Available
seats

API 570: scope, intervals, re-rating, repairs, examination, pressure testing, inspection data evaluation, buried piping.

Free

API 570 | Inspection and Repair of Piping Systems

Arveng Training

Teacher

0 Available
seats

API 570: scope, intervals, re-rating, repairs, examination, pressure testing, inspection data evaluation, buried piping.

Free

ASME PCC-1 | Guidelines for Bolted Flange Joint Assembly

Ricardo Freitas

Teacher

0 Available
seats

ASME PCC-1: Introduction, bolted flange joint alignment, Installation of bolts, Inspection and documentation.

Free

ASME VIII Div. 2 | Design of Pressure Vessels by Analysis

Javier Tirenti

Teacher

0 Available
seats

Design by Analysis code compliance checks for collapse, ratcheting, fatigue, and buckling load cases. Differences between types of stresses. Structural stress using FEA, linearization.

Free

ASME | Material Selection for Industrial Equipment

Javier Tirenti

Teacher

0 Available
seats

Selection of Materials for Special Services: Fe-C Diagram, Corrosion Mechanisms, Brittle Fracture, Impact Test, Special Services, High Temperature, Cryogenic Service.

Free

Plant Shutdowns in Refineries

Arveng Training

Teacher

0 Available
seats

Introduction to the modularization of industrial plants: conceptualization, planning, feasibility analysis, manufacturing, transport, and installation.

Testimonials

Munthir A.

Project Engineer

A high quality training program, each course is rich in contents and tailored to industrial standards and practices. The extensive experience of the instructors is the key factor in providing in-depth practical insights and understanding of real-world design cases

Okan Karabuğa

Mechanical Engineer, M.Sc. Engineering Team Leader at SOCAR-STP LLC Baku, Azerbaijan.

The pressure vessel design course is well prepared and designed for engineers who are interested in pressurized equipment. During the course, you can reach the instructors for every single question. The study materials have diverse knowledge from basic concepts to best practices. After enrolling in this course, I could keep my proficiency updated and I improved my perception of pressure vessels. As a consequence, I appreciate your efforts to contribute to people’s career development. I always follow your blogs and courses.

Ranjith Rajendran

Tank Construction Engineer at MCDERMOTT CB&I Storage Solutions, Dubai, United Arab Emirates.

The API 650 Online Couse is very much valuable and was challenging, but the study notes, materials and instructions were always there supporting me and ready to help. I enjoyed the class tremendously and I gained both the skills and confidence to thoughtfully use a variety of quantitative approaches In my work . I look forward to taking another class.

Óscar Bustamante Almazán

Engineer in Germany

I did the ASME B31 pipe design course with you and I left very satisfied. I opened many professional doors, thanks to which, I have reached where I am today.
Congratulations for the quality of service they offer. Without a doubt it is to date the best engineering training I have attended.

Cristhian Balderrama

Engineering Manager at Ausenco

The content was very thorough and the lecturer’s knowledge of the subject and ability to translate theoretical concepts to the real design cases was very impressive. I will recommend this course to those willing to expand their knowledge.

Fernando Armisen

Deputy Tehcnical Director Abantia Ticsa

It is great to be able to enrol in this kind of training sessions, where the instructor has a very deep knowledge of the subject and also possess a dilated international experience, enabling him to bring relevant experiences in many different sectors of this filed.

Alicia Castillo

Head of Training Department COIIM

After five years collaborating with Arveng, instructors have always shown high levels of commitment, responsibility and professionalism. At the same time, instructors have demonstrated vast experience and a deep knowledge of the different subjects given.