Pack of Online Static Equipment Courses
960,00 €
Available!
ASME VIII | Design of Pressure Vessels for Industrial Plants
120 hours course dedication
What to expect?
-
Design pressure vessels according to ASME Section VIII Division 1 and its key sections.
-
Select suitable materials considering mechanical properties, corrosion, and operating conditions.
-
Evaluate loading conditions: sustained, cyclic, local, and seismic loads in industrial equipment.
-
Calculate joint efficiencies and decide between full and spot weld designs.
-
Size cylindrical shells and heads for internal and external pressure.
-
Design standard and non-standard nozzles and flanges, including reinforcement and specific calculation methods.
-
Analyze internal and external components such as trays, baffles, lugs, and platforms.
-
Verify vertical and horizontal supports including skirts, legs, saddles, and cradles.
-
Apply structural design criteria for wind loads and seismic movements.
-
Use calculation spreadsheets to validate thicknesses, stresses, and design configurations.
TEMA | Design of shell & tube heat exchangers for Industrial Plants
120 hours course dedication
What to expect?
- Design shell and tube heat exchangers according to TEMA, HEI and API 660 codes.
- Configure tube layouts and define passes through shell and tubes based on thermal requirements.
- Evaluate permanent, cyclic, local, and seismic load conditions on industrial equipment.
- Select materials considering corrosion, mechanical properties, and minimum design temperature.
- Calculate joint efficiency and decide between “full” or “spot” weld designs
- Design cylindrical shells and heads for internal and external pressure with stiffening rings.
- Model the tube bundle, including baffles, tube sheets, heads, and conical transitions.
- Size standard and non-standard connections and flanges with structural reinforcements.
- Analyze wind and seismic loads applied to horizontal exchangers and their supports.
- Verify support saddles considering thermal expansion, thicknesses, and anchor bolts.
What will you learn with this pack?
- Design pressure vessels according to ASME VIII Division 1 for industrial applications.
- Calculate internal and external stresses in cylindrical shells, spherical surfaces, and heads.
- Select materials considering allowable corrosion, mechanical properties, and minimum design temperature.
- Evaluate weld joint efficiency and apply “Full” or “Spot” design criteria.
- Design standard and non-standard connections and flanges, including reinforcements and calculation methods.
- Analyze wind and seismic loads on vertical and horizontal vessels with various support types.
- Configure shell-and-tube heat exchangers following TEMA, HEI, and API 660 standards.
- Design tube bundles, including tube sheets, baffles, heads, and conical transitions.
- Determine design conditions for shell, tubes, supports, and structural elements.
- Apply technical criteria for material selection in industrial heat exchangers.
- …and much more!
FREQUENTLY ASKED QUESTIONS (FAQ’s):
Who should attend?
These courses are intended for graduates (or soon to be), designers, freelancers, technicians and engineers involved in: calculation, design, selection, manufacturing, safety, quality and maintenance of systems and equipment in industrial processes.
Previous knowledge of the subject is not required to attend to these courses.
*The packs are individual, the courses must be taken by the same person.
Training objectives
The main objective of these courses is to transfer to participants the theoretical and practical skills required in projects, obtained from experience and sound engineering practices.
How can I enroll in these courses?
To enroll, you need only follow the below steps:
- Choose the modality you need from the drop-down menu (top, right-hand corner of the web).
- Click on “Add to cart”
- Complete the purchase process using the payment options available.
- You will receive a confirmation email.
- Start training your skills!
Are there discounts for groups/companies?
Yes! Write to us and ask about our plans for groups and companies.
Can I pay installments?
Of course! You can pay in three installments WITHOUT INTEREST by making your purchase through Paypal. More information.
Can I register and pay an online course for a 3rd party/more than one person?
To enroll a 3rd party/more than one person, you have to follow the below steps:
- Change the number of products of your cart (1 by default):
a. Change the number of products before clicking on “Add to Cart”.
b. Directly on the cart screen, there is a button where you can increase or decrease the amount of products to buy. - State the Name and Surname of the participants in the observations field when completing the purchase.
EXAMPLE OF CERTIFICATES ISSUED BY ASME:
Upon successful completion of the courses participants will earn 240 PDH’s, equivalent to 24 CEU’s.
PDH: Professional Development Hour
CEU: Continuing Education Unit
REQUEST MORE INFORMATION!
Please, send us your query and we will reply as soon as possible.
About Instructors
Javier Tirenti
Senior Mechanical Engineer and Master in Business Administration (MBA). More than 20 years of experience in design, calculation, selection and fabrication of mechanical equipment and structures in general. Vast experience providing specific training sessions in both classroom and online approaches.
WhatsApp