Pack of Online Piping Courses
50% OFF!
ASME B31 | Design of Piping Systems for Industrial Plants
120 hours course dedication
What to expect?
-
Master the advanced principles of piping system design in accordance with the ASME B31 code.
-
Select appropriate materials considering pressure, temperature, and service requirements.
-
Calculate the required thickness of pipes and components using formulas and factors defined by the codes.
-
Analyze stresses in piping systems: sustained, thermal, and occasional loads.
-
Design supports, anchors, and guides to ensure the structural integrity of the system.
-
Interpret isometric drawings and P&ID diagrams to integrate them into code-compliant designs.
-
Evaluate flexibility and thermal expansion through proper use of expansion joints and compensators.
-
Apply manual and software-based calculation methods to validate and optimize designs.
-
Adopt engineering best practices and inspection criteria for industrial piping systems.
-
Address real-world design and modification challenges in complex piping projects.
Design and Selection of Supports for Piping Systems
60 hours course dedication
What to expect?
- Design pipe supports according to their function, construction, and connection to the system.
- Interpret a flexibility isometric and translate it into support requirements.
- Select types of rigid supports such as rests, guides, anchors, and hangers.
- Evaluate the use of flexible supports like variable and constant spring hangers.
- Determine optimal placement and spacing of supports in industrial systems.
- Calculate structural stresses and deformations in supports using technical tools.
- Design special supports for vibrating systems, cryogenic setups, and special equipment.
- Apply technical symbology for restraints and support elements in engineering projects.
- Use spreadsheets and real data for practical support design.
- Perform assimilation exercises and case studies to validate acquired knowledge.
Piping Class Specification for Industrial Plants
40 hours course dedication
What to expect?
- Design a piping specification for industrial systems.
- Apply ASME B31 codes and reference standards for piping design.
- Select components such as flanges, elbows, tees, valves, and fittings based on service.
- Calculate required and nominal pipe thicknesses according to pressure and temperature.
- Define pressure-temperature ranges and operating and design conditions
- Code piping specifications based on technical and regulatory criteria.
- Evaluate joining methods: welding, threading, compression, and proprietary types.
- Establish the branch table and calculate reinforcement in pipe-to-pipe connections.
- Identify plant services and group them by operating conditions.
- Interpret nomenclature, terminology, and technical documentation of piping systems.
What will you learn with this pack?
- Design piping systems in accordance with ASME B31.1, B31.3, B31.4, and B31.8 codes.
- Calculate pipe thicknesses for internal pressure, external loads, and buried conditions.
- Select materials based on mechanical properties, allowable corrosion, and regulatory requirements.
- Specify components such as flanges, valves, elbows, and fittings based on service and conditions.
- Interpret flexibility isometrics and translate them into structural support requirements.
- Design rigid and flexible supports, including variable and constant load springs.
- Determine optimal support spacing and calculate structural stresses in industrial systems.
- Define piping class using pressure-temperature ratings, joining methods, and technical coding.
- Apply technical symbols in restraints, supports, and piping design elements.
- Perform flexibility analysis, thermal expansion review, and stress evaluation in complex systems.
- …and much more!
FREQUENTLY ASKED QUESTIONS (FAQ’s):
Who should attend?
These courses are intended for graduates (or soon to be), designers, freelancers, technicians and engineers involved in: calculation, design, selection, manufacturing, safety, quality and maintenance of systems and equipment in industrial processes.
Previous knowledge of the subject is not required to attend to these courses.
*The packs are individual, the courses must be taken by the same person.
Training objectives
The main objective of these courses is to transfer to participants the theoretical and practical skills required in projects, obtained from experience and sound engineering practices.
How can I enroll in these courses?
To enroll, you need only follow the below steps:
- Choose the modality you need from the drop-down menu (top, right-hand corner of the web).
- Click on “Add to cart”
- Complete the purchase process using the payment options available.
- You will receive a confirmation email.
- Start training your skills!
Are there discounts for groups/companies?
Yes! Write to us and ask about our plans for groups and companies.
Can I pay installments?
Of course! You can pay in three installments WITHOUT INTEREST by making your purchase through Paypal. More information.
Can I register and pay an online course for a 3rd party/more than one person?
To enroll a 3rd party/more than one person, you have to follow the below steps:
- Change the number of products of your cart (1 by default):
a. Change the number of products before clicking on “Add to Cart”.
b. Directly on the cart screen, there is a button where you can increase or decrease the amount of products to buy. - State the Name and Surname of the participants in the observations field when completing the purchase.
EXAMPLE OF CERTIFICATES ISSUED BY ASME:
Upon successful completion of the courses participants will earn 220 PDH’s, equivalent to 22 CEU’s.
PDH: Professional Development Hour
CEU: Continuing Education Unit
REQUEST MORE INFORMATION!
Please, send us your query and we will reply as soon as possible.
About Instructors
Javier Tirenti
Senior Mechanical Engineer and Master in Business Administration (MBA). More than 20 years of experience in design, calculation, selection and fabrication of mechanical equipment and structures in general. Vast experience providing specific training sessions in both classroom and online approaches.